Gallardo7761/setr2-monorepo
1
0
Fork 0
Code Activity
Files
bd24f1fb7905687d16c9d653824f310f1d09e924
setr2-monorepo/P3_SETR2/BSP/stm32l475e_iot01.h
Jose bd24f1fb79 p3 fin
2025-10-27 17:07:20 +01:00

258 lines
9.3 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32l475e_iot01.h
* @author MCD Application Team
* @brief STM32L475E IOT01 board support package
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L475E_IOT01_H
#define __STM32L475E_IOT01_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l4xx_hal.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32L475E_IOT01
* @{
*/
/** @addtogroup STM32L475E_IOT01_LOW_LEVEL
* @{
*/
/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
* @{
*/
typedef enum
{
LED2 = 0,
LED_GREEN = LED2,
}Led_TypeDef;
typedef enum
{
BUTTON_USER = 0
}Button_TypeDef;
typedef enum
{
BUTTON_MODE_GPIO = 0,
BUTTON_MODE_EXTI = 1
}ButtonMode_TypeDef;
typedef enum
{
COM1 = 0,
COM2 = 0,
}COM_TypeDef;
/**
* @}
*/
/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
* @{
*/
/**
* @brief Define for STM32L475E_IOT01 board
*/
#if !defined (USE_STM32L475E_IOT01)
#define USE_STM32L475E_IOT01
#endif
#define LEDn ((uint8_t)1)
#define LED2_PIN GPIO_PIN_14
#define LED2_GPIO_PORT GPIOB
#define LED2_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define LED2_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define LEDx_GPIO_CLK_ENABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_ENABLE();}while(0)
#define LEDx_GPIO_CLK_DISABLE(__INDEX__) do{if((__INDEX__) == 0) LED2_GPIO_CLK_DISABLE();}while(0)
/* Only one User/Wakeup button */
#define BUTTONn ((uint8_t)1)
/**
* @brief Wakeup push-button
*/
#define USER_BUTTON_PIN GPIO_PIN_13
#define USER_BUTTON_GPIO_PORT GPIOC
#define USER_BUTTON_GPIO_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
#define USER_BUTTON_GPIO_CLK_DISABLE() __HAL_RCC_GPIOC_CLK_DISABLE()
#define USER_BUTTON_EXTI_IRQn EXTI15_10_IRQn
/**
* @brief NFC Gpio PINs
*/
#define NFC_GPIO_GPO_PIN GPIO_PIN_4
#define NFC_GPIO_GPO_PIN_PORT GPIOE
#define NFC_GPIO_RFDISABLE_PIN GPIO_PIN_2
#define NFC_GPIO_RFDISABLE_PIN_PORT GPIOE
#define NFC_GPIO_CLK_ENABLE() __HAL_RCC_GPIOE_CLK_ENABLE();
#define NFC_GPIO_CLK_DISABLE() __HAL_RCC_GPIOE_CLK_DISABLE();
#define COMn ((uint8_t)1)
/**
* @brief Definition for COM port1, connected to USART1
*/
#define DISCOVERY_COM1 USART1
#define DISCOVERY_COM1_CLK_ENABLE() __HAL_RCC_USART1_CLK_ENABLE()
#define DISCOVERY_COM1_CLK_DISABLE() __HAL_RCC_USART1_CLK_DISABLE()
#define DISCOVERY_COM1_TX_PIN GPIO_PIN_6
#define DISCOVERY_COM1_TX_GPIO_PORT GPIOB
#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define DISCOVERY_COM1_TX_AF GPIO_AF7_USART1
#define DISCOVERY_COM1_RX_PIN GPIO_PIN_7
#define DISCOVERY_COM1_RX_GPIO_PORT GPIOB
#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define DISCOVERY_COM1_RX_AF GPIO_AF7_USART1
#define DISCOVERY_COM1_IRQn USART1_IRQn
#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();}} while(0)
#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_DISABLE();}} while(0)
#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();}} while(0)
#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_DISABLE();}} while(0)
#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();}} while(0)
#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__) do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_DISABLE();}} while(0)
/* User can use this section to tailor I2Cx instance used and associated resources */
/* Definition for I2Cx resources */
#define DISCOVERY_I2Cx I2C2
#define DISCOVERY_I2Cx_CLK_ENABLE() __HAL_RCC_I2C2_CLK_ENABLE()
#define DISCOVERY_I2Cx_CLK_DISABLE() __HAL_RCC_I2C2_CLK_DISABLE()
#define DISCOVERY_DMAx_CLK_ENABLE() __HAL_RCC_DMA1_CLK_ENABLE()
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE() __HAL_RCC_GPIOB_CLK_ENABLE()
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_DISABLE() __HAL_RCC_GPIOB_CLK_DISABLE()
#define DISCOVERY_I2Cx_FORCE_RESET() __HAL_RCC_I2C2_FORCE_RESET()
#define DISCOVERY_I2Cx_RELEASE_RESET() __HAL_RCC_I2C2_RELEASE_RESET()
/* Definition for I2Cx Pins */
#define DISCOVERY_I2Cx_SCL_PIN GPIO_PIN_10
#define DISCOVERY_I2Cx_SDA_PIN GPIO_PIN_11
#define DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT GPIOB
#define DISCOVERY_I2Cx_SCL_SDA_AF GPIO_AF4_I2C2
/* I2C interrupt requests */
#define DISCOVERY_I2Cx_EV_IRQn I2C2_EV_IRQn
#define DISCOVERY_I2Cx_ER_IRQn I2C2_ER_IRQn
/* I2C clock speed configuration (in Hz)
WARNING:
Make sure that this define is not already declared in other files.
It can be used in parallel by other modules. */
#ifndef DISCOVERY_I2C_SPEED
#define DISCOVERY_I2C_SPEED 100000
#endif /* DISCOVERY_I2C_SPEED */
#ifndef DISCOVERY_I2Cx_TIMING
#define DISCOVERY_I2Cx_TIMING ((uint32_t)0x00702681)
#endif /* DISCOVERY_I2Cx_TIMING */
/* I2C Sensors address */
/* LPS22HB (Pressure) I2C Address */
#define LPS22HB_I2C_ADDRESS (uint8_t)0xBA
/* HTS221 (Humidity) I2C Address */
#define HTS221_I2C_ADDRESS (uint8_t)0xBE
#ifdef USE_LPS22HB_TEMP
/* LPS22HB Sensor hardware I2C address */
#define TSENSOR_I2C_ADDRESS LPS22HB_I2C_ADDRESS
#else /* USE_HTS221_TEMP */
/* HTS221 Sensor hardware I2C address */
#define TSENSOR_I2C_ADDRESS HTS221_I2C_ADDRESS
#endif
/* NFC I2C address and specific config parameters */
#define M24SR_I2C_ADDR (uint8_t) 0xAC /*!< M24SR address */
#define NFC_I2C_STATUS_SUCCESS (uint16_t) 0x0000
#define NFC_I2C_ERROR_TIMEOUT (uint16_t) 0x0011
#define NFC_I2C_TIMEOUT_STD (uint32_t) 8 /* I2C Time out (ms), used to call Transmit/Receive HAL functions */
#define NFC_I2C_TIMEOUT_MAX (uint32_t) 200 /* I2C Time out (ms), this is the maximum time needed by M24SR to complete any command */
#define NFC_I2C_TRIALS (uint32_t) 1 /* In case M24SR will reply ACK failed allow to perform retry before returning error (HAL option not used) */
/**
* @}
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/* Exported macros -----------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
* @{
*/
uint32_t BSP_GetVersion(void);
void BSP_LED_Init(Led_TypeDef Led);
void BSP_LED_DeInit(Led_TypeDef Led);
void BSP_LED_On(Led_TypeDef Led);
void BSP_LED_Off(Led_TypeDef Led);
void BSP_LED_Toggle(Led_TypeDef Led);
void BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
void BSP_PB_DeInit(Button_TypeDef Button);
uint32_t BSP_PB_GetState(Button_TypeDef Button);
void BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
void BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L475E_IOT01_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
View Git Blame Copy Permalink