Gallardo7761/setr2-monorepo
1
0
Fork 0
Code Activity
Files
f6fa6d94cef31aebfb3c616db67b8242024424cc
setr2-monorepo/P5_SETR2/Components/st25dv/st25dv.c
Jose f6fa6d94ce add P4 & P5
2025-11-24 15:44:12 +01:00

2064 lines
62 KiB
C
Raw Blame History

/**
******************************************************************************
* @file st25dv.c
* @author MMY Application Team
* @brief This file provides set of driver functions to manage communication
* between BSP and ST25DV chip.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "st25dv.h"
/** @addtogroup BSP
* @{
*/
/** @defgroup ST25DV ST25DV driver
* @brief This module implements the functions to drive the ST25DV NFC dynamic tag.
* @details As recommended by the STM32 Cube methodology, this driver provides a standard structure to expose the NFC tag standard API.\n
* It also provides an extended API through its extended driver structure.\n
* To be usable on any MCU, this driver calls several IOBus functions.
* The IOBus functions are implemented outside this driver, and are in charge of accessing the MCU peripherals used for the communication with the tag.
* @{
*/
/* External variables --------------------------------------------------------*/
/* Private typedef -----------------------------------------------------------*/
/* Private defines -----------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static int32_t ReadRegWrap(void *Handle, uint16_t Reg, uint8_t *pData, uint16_t Length);
static int32_t WriteRegWrap(void *Handle, uint16_t Reg, const uint8_t *pData, uint16_t Length);
static int32_t ST25DV_Init( ST25DV_Object_t* );
static int32_t ST25DV_ReadID(ST25DV_Object_t* pObj, uint8_t * const pICRef );
static int32_t ST25DV_IsDeviceReady(ST25DV_Object_t* pObj, const uint32_t Trials );
static int32_t ST25DV_GetGPOStatus(ST25DV_Object_t* pObj, uint16_t * const pGPOStatus );
static int32_t ST25DV_ConfigureGPO(ST25DV_Object_t* pObj, const uint16_t ITConf );
static int32_t ST25DV_ReadData(ST25DV_Object_t* pObj, uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte );
static int32_t ST25DV_WriteData(ST25DV_Object_t* pObj, const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte );
/* Global variables ---------------------------------------------------------*/
/**
* @brief Standard NFC tag driver API for the ST25DV.
* @details Provides a generic way to access the ST25DV implementation of the NFC tag standard driver functions.
*/
ST25DV_Drv_t St25Dv_Drv =
{
ST25DV_Init,
ST25DV_ReadID,
ST25DV_IsDeviceReady,
ST25DV_GetGPOStatus,
ST25DV_ConfigureGPO,
ST25DV_ReadData,
ST25DV_WriteData,
};
/* Public functions ---------------------------------------------------------*/
/**
* @brief Register Component Bus IO operations
* @param pObj the device pObj
* @retval 0 in case of success, an error code otherwise
*/
int32_t ST25DV_RegisterBusIO (ST25DV_Object_t* pObj, ST25DV_IO_t *pIO)
{
int32_t ret = ST25DV_OK;
if (pObj == NULL)
{
ret = ST25DV_ERROR;
}
else
{
pObj->IO.Init = pIO->Init;
pObj->IO.DeInit = pIO->DeInit;
pObj->IO.Write = pIO->Write;
pObj->IO.Read = pIO->Read;
pObj->IO.IsReady = pIO->IsReady;
pObj->IO.GetTick = pIO->GetTick;
pObj->Ctx.ReadReg = ReadRegWrap;
pObj->Ctx.WriteReg = WriteRegWrap;
pObj->Ctx.handle = pObj;
if (pObj->IO.Init == NULL)
{
ret = ST25DV_ERROR;
}
else
{
if (pObj->IO.Init() != 0)
{
ret = ST25DV_ERROR;
}
}
}
return ret;
}
/**
* @brief ST25DV nfctag Initialization.
* @param pObj the device pObj
* @retval Component error status.
*/
static int32_t ST25DV_Init( ST25DV_Object_t *pObj )
{
int32_t status = ST25DV_OK;
if (pObj->IsInitialized == 0U)
{
uint8_t nfctag_id;
ST25DV_ReadID(pObj,&nfctag_id);
if( (nfctag_id != I_AM_ST25DV04) && (nfctag_id != I_AM_ST25DV64) )
{
status = ST25DV_ERROR;
} else {
pObj->IsInitialized = 1U;
}
}
return status;
}
/**
* @brief Reads the ST25DV ID.
* @param pObj the device pObj
* @param pICRef Pointeron a uint8_t used to return the ST25DV ID.
* @retval Component error status.
*/
static int32_t ST25DV_ReadID(ST25DV_Object_t* pObj, uint8_t * const pICRef )
{
/* Read ICRef on device */
return st25dv_get_icref(&(pObj->Ctx), pICRef);
}
/**
* @brief Checks the ST25DV availability.
* @param pObj the device pObj
* @details The ST25DV I2C is NACKed when a RF communication is on-going.
* This function determines if the ST25DV is ready to answer an I2C request.
* @param Trials Max number of tentative.
* @retval Component error status.
*/
static int32_t ST25DV_IsDeviceReady(ST25DV_Object_t* pObj, const uint32_t Trials )
{
/* Test communication with device */
return pObj->IO.IsReady(ST25DV_ADDR_DATA_I2C, Trials );
}
/**
* @brief Reads the ST25DV GPO configuration.
* @param pObj the device pObj
* @param pGPOStatus Pointer on a uint16_t used to return the current GPO consiguration, as:
* - RFUSERSTATE = 0x01
* - RFBUSY = 0x02
* - RFINTERRUPT = 0x04
* - FIELDFALLING = 0x08
* - FIELDRISING = 0x10
* - RFPUTMSG = 0x20
* - RFGETMSG = 0x40
* - RFWRITE = 0x80
*
* @retval Component error status.
*/
static int32_t ST25DV_GetGPOStatus(ST25DV_Object_t* pObj, uint16_t * const pGPOStatus )
{
uint8_t reg_value;
int32_t status;
/* Read value of GPO register */
status = st25dv_get_gpo_all(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract GPO configuration */
*pGPOStatus = (uint16_t)reg_value;
}
return status;
}
/**
* @brief Configures the ST25DV GPO.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param ITConf Provides the GPO configuration to apply:
* - RFUSERSTATE = 0x01
* - RFBUSY = 0x02
* - RFINTERRUPT = 0x04
* - FIELDFALLING = 0x08
* - FIELDRISING = 0x10
* - RFPUTMSG = 0x20
* - RFGETMSG = 0x40
* - RFWRITE = 0x80
*
* @retval Component error status.
*/
static int32_t ST25DV_ConfigureGPO(ST25DV_Object_t* pObj, const uint16_t ITConf )
{
/* Write GPO configuration to register */
return st25dv_set_gpo_all( &(pObj->Ctx), (uint8_t *)&ITConf);
}
/**
* @brief Reads N bytes of Data, starting from the specified I2C address.
* @param pObj the device pObj
* @param pData Pointer used to return the read data.
* @param TarAddr I2C data memory address to read.
* @param NbByte Number of bytes to be read.
* @retval Component error status.
*/
static int32_t ST25DV_ReadData(ST25DV_Object_t* pObj, uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
/* Read Data in user memory */
return pObj->IO.Read(ST25DV_ADDR_DATA_I2C, TarAddr, pData, NbByte );
}
/**
* @brief Writes N bytes of Data starting from the specified I2C Address.
* @param pObj the device pObj
* @param pData Pointer on the data to be written.
* @param TarAddr I2C data memory address to be written.
* @param NbByte Number of bytes to be written.
* @retval Component error status.
*/
static int32_t ST25DV_WriteData(ST25DV_Object_t* pObj, const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
int32_t ret;
uint16_t split_data_nb;
const uint8_t *pdata_index = (const uint8_t *)pData;
uint16_t bytes_to_write = NbByte;
uint16_t mem_addr = TarAddr;
/* ST25DV can write a maximum of 256 bytes in EEPROM per i2c communication */
do
{
/* Split write if data to write is superior of max write bytes for ST25DV */
if( bytes_to_write > ST25DV_MAX_WRITE_BYTE )
{
/* DataSize higher than max page write, copy data by page */
split_data_nb = (uint16_t)ST25DV_MAX_WRITE_BYTE;
}
else
{
/* DataSize lower or equal to max page write, copy only last bytes */
split_data_nb = bytes_to_write;
}
/* Write split_data_nb bytes in memory */
ret = pObj->IO.Write( ST25DV_ADDR_DATA_I2C, mem_addr, pdata_index, split_data_nb);
if( ret == ST25DV_OK )
{
int32_t pollstatus;
/* Poll until EEPROM is available */
uint32_t tickstart = pObj->IO.GetTick();
/* Wait until ST25DV is ready or timeout occurs */
do
{
pollstatus = pObj->IO.IsReady( ST25DV_ADDR_DATA_I2C, 1 );
} while( ( (uint32_t)((int32_t)pObj->IO.GetTick() - (int32_t)tickstart) < ST25DV_WRITE_TIMEOUT) && (pollstatus != ST25DV_OK) );
if( pollstatus != ST25DV_OK )
{
ret = ST25DV_TIMEOUT;
}
}
/* update index, dest address, size for next write */
pdata_index += split_data_nb;
mem_addr += split_data_nb;
bytes_to_write -= split_data_nb;
}
while( ( bytes_to_write > 0 ) && ( ret == ST25DV_OK ) );
return ret;
}
/**
* @brief Reads the ST25DV IC Revision.
* @param pObj the device pObj
* @param pICRev Pointer on the uint8_t used to return the ST25DV IC Revision number.
* @retval Component error status.
*/
int32_t ST25DV_ReadICRev(ST25DV_Object_t* pObj, uint8_t * const pICRev )
{
/* Read ICRev on device */
return st25dv_get_icrev(&(pObj->Ctx), pICRev);
}
/**
* @brief Reads the ST25DV ITtime duration for the GPO pulses.
* @param pObj the device pObj
* @param pITtime Pointer used to return the coefficient for the GPO Pulse duration (Pulse duration = 302,06 us - ITtime * 512 / fc).
* @retval Component error status.
*/
int32_t ST25DV_ReadITPulse(ST25DV_Object_t* pObj, ST25DV_PULSE_DURATION * const pITtime )
{
uint8_t reg_value;
int32_t status;
/* Read ITtime register value */
status = st25dv_get_ittime_delay( &(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract delay coefficient value */
*pITtime = (ST25DV_PULSE_DURATION)reg_value;
}
return status;
}
/**
* @brief Configures the ST25DV ITtime duration for the GPO pulse.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param ITtime Coefficient for the Pulse duration to be written (Pulse duration = 302,06 us - ITtime * 512 / fc)
* @retval Component error status.
*/
int32_t ST25DV_WriteITPulse( ST25DV_Object_t* pObj, const ST25DV_PULSE_DURATION ITtime )
{
uint8_t reg_value;
/* prepare data to write */
reg_value = (uint8_t)ITtime;
/* Write value for ITtime register */
return st25dv_set_ittime_delay( &(pObj->Ctx), &reg_value );
}
/**
* @brief Reads N bytes from Registers, starting at the specified I2C address.
* @param pObj the device pObj
* @param pData Pointer used to return the read data.
* @param TarAddr I2C memory address to be read.
* @param NbByte Number of bytes to be read.
* @retval Component error status.
*/
int32_t ST25DV_ReadRegister(ST25DV_Object_t* pObj, uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
/* Read Data in system memory */
return pObj->IO.Read( ST25DV_ADDR_SYST_I2C, TarAddr, pData, NbByte );
}
/**
* @brief Writes N bytes to the specified register.
* @param pObj the device pObj
* @details Needs the I2C Password presentation to be effective.
* @param pData Pointer on the data to be written.
* @param TarAddr I2C register address to written.
* @param NbByte Number of bytes to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteRegister(ST25DV_Object_t* pObj, const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
int32_t ret;
uint8_t split_data_nb;
uint16_t bytes_to_write = NbByte;
uint16_t mem_addr = TarAddr;
const uint8_t *pdata_index = (const uint8_t *)pData;
/* ST25DV can write a maximum of 256 bytes in EEPROM per i2c communication */
do
{
/* Split write if data to write is superior of max write bytes for ST25DV */
if( bytes_to_write > ST25DV_MAX_WRITE_BYTE )
{
/* DataSize higher than max page write, copy data by page */
split_data_nb = (uint8_t)ST25DV_MAX_WRITE_BYTE;
}
else
{
/* DataSize lower or equal to max page write, copy only last bytes */
split_data_nb = bytes_to_write;
}
/* Write split_data_nb bytes in register */
ret = pObj->IO.Write( ST25DV_ADDR_SYST_I2C, mem_addr, pdata_index, split_data_nb);
if( ret == ST25DV_OK )
{
int32_t pollstatus;
/* Poll until EEPROM is available */
uint32_t tickstart = pObj->IO.GetTick();
/* Wait until ST25DV is ready or timeout occurs */
do
{
pollstatus = pObj->IO.IsReady( ST25DV_ADDR_DATA_I2C, 1 );
} while( ( (uint32_t)((int32_t)pObj->IO.GetTick() - (int32_t)tickstart) < ST25DV_WRITE_TIMEOUT) && (pollstatus != ST25DV_OK) );
if( pollstatus != ST25DV_OK )
{
ret = ST25DV_TIMEOUT;
}
}
/* update index, dest address, size for next write */
pdata_index += split_data_nb;
mem_addr += split_data_nb;
bytes_to_write -= split_data_nb;
}
while( ( bytes_to_write > 0 ) && ( ret == ST25DV_OK ) );
return ret;
}
/**
* @brief Reads the ST25DV UID.
* @param pObj the device pObj
* @param pUid Pointer used to return the ST25DV UID value.
* @retval Component error status.
*/
int32_t ST25DV_ReadUID(ST25DV_Object_t* pObj, ST25DV_UID * const pUid )
{
uint8_t reg_value[8];
uint8_t i;
int32_t status;
/* Read value of UID registers */
status = st25dv_get_uid( &(pObj->Ctx), reg_value);
if( status == ST25DV_OK )
{
/* Store information in 2 WORD */
pUid->MsbUid = 0;
for( i = 0; i < 4; i++ )
{
pUid->MsbUid = (pUid->MsbUid << 8) | reg_value[7 - i];
}
pUid->LsbUid = 0;
for( i = 0; i < 4; i++ )
{
pUid->LsbUid = (pUid->LsbUid << 8) | reg_value[3 - i];
}
}
return status;
}
/**
* @brief Reads the ST25DV DSFID.
* @param pObj the device pObj
* @param pDsfid Pointer used to return the ST25DV DSFID value.
* @retval Component error status.
*/
int32_t ST25DV_ReadDSFID(ST25DV_Object_t* pObj, uint8_t * const pDsfid )
{
/* Read DSFID register */
return st25dv_get_dsfid(&(pObj->Ctx), pDsfid);
}
/**
* @brief Reads the ST25DV DSFID RF Lock state.
* @param pObj the device pObj
* @param pLockDsfid Pointer on a ST25DV_LOCK_STATUS used to return the DSFID lock state.
* @retval Component error status.
*/
int32_t ST25DV_ReadDsfidRFProtection(ST25DV_Object_t* pObj, ST25DV_LOCK_STATUS * const pLockDsfid )
{
uint8_t reg_value;
int32_t status;
/* Read register */
status = st25dv_get_lockdsfid(&(pObj->Ctx), &reg_value );
if( status == ST25DV_OK )
{
/* Extract Lock Status */
if( reg_value == 0 )
{
*pLockDsfid = ST25DV_UNLOCKED;
}
else
{
*pLockDsfid = ST25DV_LOCKED;
}
}
return status;
}
/**
* @brief Reads the ST25DV AFI.
* @param pObj the device pObj
* @param pAfi Pointer used to return the ST25DV AFI value.
* @retval Component error status.
*/
int32_t ST25DV_ReadAFI(ST25DV_Object_t* pObj, uint8_t * const pAfi )
{
/* Read AFI register */
return st25dv_get_afi(&(pObj->Ctx), pAfi);
}
/**
* @brief Reads the AFI RF Lock state.
* @param pObj the device pObj
* @param pLockAfi Pointer on a ST25DV_LOCK_STATUS used to return the ASFID lock state.
* @retval Component error status.
*/
int32_t ST25DV_ReadAfiRFProtection(ST25DV_Object_t* pObj, ST25DV_LOCK_STATUS * const pLockAfi )
{
uint8_t reg_value;
int32_t status;
/* Read register */
status = st25dv_get_lockafi( &(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract Lock Status */
if( reg_value == 0 )
{
*pLockAfi = ST25DV_UNLOCKED;
}
else
{
*pLockAfi = ST25DV_LOCKED;
}
}
return status;
}
/**
* @brief Reads the I2C Protected Area state.
* @param pObj the device pObj
* @param pProtZone Pointer on a ST25DV_I2C_PROT_ZONE structure used to return the Protected Area state.
* @retval Component error status.
*/
int32_t ST25DV_ReadI2CProtectZone(ST25DV_Object_t* pObj, ST25DV_I2C_PROT_ZONE * const pProtZone )
{
uint8_t reg_value;
int32_t status;
/* Read value of I2c Protected Zone register */
status = st25dv_get_i2css_all( &(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Dispatch information to corresponding struct member */
pProtZone->ProtectZone1 = (ST25DV_PROTECTION_CONF)( (reg_value & ST25DV_I2CSS_PZ1_MASK) >> ST25DV_I2CSS_PZ1_SHIFT );
pProtZone->ProtectZone2 = (ST25DV_PROTECTION_CONF)( (reg_value & ST25DV_I2CSS_PZ2_MASK) >> ST25DV_I2CSS_PZ2_SHIFT );
pProtZone->ProtectZone3 = (ST25DV_PROTECTION_CONF)( (reg_value & ST25DV_I2CSS_PZ3_MASK) >> ST25DV_I2CSS_PZ3_SHIFT );
pProtZone->ProtectZone4 = (ST25DV_PROTECTION_CONF)( (reg_value & ST25DV_I2CSS_PZ4_MASK) >> ST25DV_I2CSS_PZ4_SHIFT );
}
return status;
}
/**
* @brief Sets the I2C write-protected state to an EEPROM Area.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param Zone ST25DV_PROTECTION_ZONE value coresponding to the area to protect.
* @param ReadWriteProtection ST25DV_PROTECTION_CONF value corresponding to the protection to be set.
* @retval Component error status.
*/
int32_t ST25DV_WriteI2CProtectZonex(ST25DV_Object_t* pObj, const ST25DV_PROTECTION_ZONE Zone, const ST25DV_PROTECTION_CONF ReadWriteProtection )
{
int32_t status;
uint8_t reg_value = 0;
/* Compute and update new i2c Zone Security Status */
switch( Zone )
{
case ST25DV_PROT_ZONE1:
/* Read protection is not allowed for Zone 1 */
reg_value = (ReadWriteProtection & 0x01);
status = st25dv_set_i2css_pz1( &(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE2:
reg_value = ReadWriteProtection;
status = st25dv_set_i2css_pz2( &(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE3:
reg_value = ReadWriteProtection;
status = st25dv_set_i2css_pz3( &(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE4:
reg_value = ReadWriteProtection;
status = st25dv_set_i2css_pz4( &(pObj->Ctx), &reg_value);
break;
default:
return ST25DV_ERROR;
}
/* Write I2CZSS register */
return status;
}
/**
* @brief Reads the CCile protection state.
* @param pObj the device pObj
* @param pLockCCFile Pointer on a ST25DV_LOCK_CCFILE value corresponding to the lock state of the CCFile.
* @retval Component error status.
*/
int32_t ST25DV_ReadLockCCFile(ST25DV_Object_t* pObj, ST25DV_LOCK_CCFILE * const pLockCCFile )
{
uint8_t reg_value;
int32_t status;
/* Get actual LOCKCCFILE register value */
status = st25dv_get_lockccfile_all( &(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract CCFile block information */
if( reg_value & ST25DV_LOCKCCFILE_BLCK0_MASK )
{
pLockCCFile->LckBck0 = ST25DV_LOCKED;
}
else
{
pLockCCFile->LckBck0 = ST25DV_UNLOCKED;
}
if( reg_value & ST25DV_LOCKCCFILE_BLCK1_MASK )
{
pLockCCFile->LckBck1 = ST25DV_LOCKED;
}
else
{
pLockCCFile->LckBck1 = ST25DV_UNLOCKED;
}
}
return status;
}
/**
* @brief Locks the CCile to prevent any RF write access.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param NbBlockCCFile ST25DV_CCFILE_BLOCK value corresponding to the number of blocks to be locked.
* @param LockCCFile ST25DV_LOCK_CCFILE value corresponding to the lock state to apply on the CCFile.
* @retval Component error status.
*/
int32_t ST25DV_WriteLockCCFile(ST25DV_Object_t* pObj, const ST25DV_CCFILE_BLOCK NbBlockCCFile, const ST25DV_LOCK_STATUS LockCCFile )
{
uint8_t reg_value;
/* Configure value to write on register */
if( NbBlockCCFile == ST25DV_CCFILE_1BLCK )
{
if( LockCCFile == ST25DV_LOCKED )
{
reg_value = ST25DV_LOCKCCFILE_BLCK0_MASK;
}
else
{
reg_value = 0x00;
}
}
else
{
if( LockCCFile == ST25DV_LOCKED )
{
reg_value = ST25DV_LOCKCCFILE_BLCK0_MASK | ST25DV_LOCKCCFILE_BLCK1_MASK;
}
else
{
reg_value = 0x00;
}
}
/* Write LOCKCCFILE register */
return st25dv_set_lockccfile_all( &(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the Cfg registers protection.
* @param pObj the device pObj
* @param pLockCfg Pointer on a ST25DV_LOCK_STATUS value corresponding to the Cfg registers lock state.
* @retval Component error status.
*/
int32_t ST25DV_ReadLockCFG(ST25DV_Object_t* pObj, ST25DV_LOCK_STATUS * const pLockCfg )
{
uint8_t reg_value;
int32_t status;
/* Get actual LOCKCCFILE register value */
status = st25dv_get_lockcfg_b0(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract LOCKCFG block information */
if( reg_value )
{
*pLockCfg = ST25DV_LOCKED;
}
else
{
*pLockCfg = ST25DV_UNLOCKED;
}
}
return status;
}
/**
* @brief Lock/Unlock the Cfg registers, to prevent any RF write access.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param LockCfg ST25DV_LOCK_STATUS value corresponding to the lock state to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteLockCFG(ST25DV_Object_t* pObj, const ST25DV_LOCK_STATUS LockCfg )
{
uint8_t reg_value;
/* Configure value to write on register */
reg_value = (uint8_t)LockCfg;
/* Write LOCKCFG register */
return st25dv_set_lockcfg_b0(&(pObj->Ctx), &reg_value );
}
/**
* @brief Presents I2C password, to authorize the I2C writes to protected areas.
* @param pObj the device pObj
* @param PassWord Password value on 32bits
* @retval Component error status.
*/
int32_t ST25DV_PresentI2CPassword(ST25DV_Object_t* pObj, const ST25DV_PASSWD PassWord )
{
uint8_t ai2c_message[17] = {0};
uint8_t i;
/* Build I2C Message with Password + Validation code 0x09 + Password */
ai2c_message[8] = 0x09;
for( i = 0; i < 4; i++ )
{
ai2c_message[i] = ( PassWord.MsbPasswd >> ( (3 - i) * 8) ) & 0xFF;
ai2c_message[i + 4] = ( PassWord.LsbPasswd >> ( (3 - i) * 8) ) & 0xFF;
ai2c_message[i + 9] = ai2c_message[i];
ai2c_message[i + 13] = ai2c_message[i + 4];
};
/* Present password to ST25DV */
return ST25DV_WriteRegister(pObj, ai2c_message, ST25DV_I2CPASSWD_REG, 17 );
}
/**
* @brief Writes a new I2C password.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param PassWord New I2C PassWord value on 32bits.
* @retval Component error status.
*/
int32_t ST25DV_WriteI2CPassword( ST25DV_Object_t* pObj, const ST25DV_PASSWD PassWord )
{
uint8_t ai2c_message[17] = {0};
uint8_t i;
/* Build I2C Message with Password + Validation code 0x07 + Password */
ai2c_message[8] = 0x07;
for( i = 0; i < 4; i++ )
{
ai2c_message[i] = ( PassWord.MsbPasswd >> ( (3 - i) * 8) ) & 0xFF;
ai2c_message[i + 4] = ( PassWord.LsbPasswd >> ( (3 - i) * 8) ) & 0xFF;
ai2c_message[i + 9] = ai2c_message[i];
ai2c_message[i + 13] = ai2c_message[i + 4];
};
/* Write new password in I2CPASSWD register */
return ST25DV_WriteRegister(pObj, ai2c_message, ST25DV_I2CPASSWD_REG, 17 );
}
/**
* @brief Reads the RF Zone Security Status (defining the allowed RF accesses).
* @param pObj the device pObj
* @param Zone ST25DV_PROTECTION_ZONE value coresponding to the protected area.
* @param pRfprotZone Pointer on a ST25DV_RF_PROT_ZONE value corresponding to the area protection state.
* @retval Component error status.
*/
int32_t ST25DV_ReadRFZxSS( ST25DV_Object_t* pObj, const ST25DV_PROTECTION_ZONE Zone, ST25DV_RF_PROT_ZONE * const pRfprotZone )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of Sector Security Status register */
switch( Zone )
{
case ST25DV_PROT_ZONE1:
status = st25dv_get_rfa1ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE2:
status = st25dv_get_rfa2ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE3:
status = st25dv_get_rfa3ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE4:
status = st25dv_get_rfa4ss_all(&(pObj->Ctx), &reg_value);
break;
default:
status = ST25DV_ERROR;
}
if( status == ST25DV_OK )
{
/* Extract Sector Security Status configuration */
pRfprotZone->PasswdCtrl = (ST25DV_PASSWD_PROT_STATUS)((reg_value & ST25DV_RFA1SS_PWDCTRL_MASK) >> ST25DV_RFA1SS_PWDCTRL_SHIFT);
pRfprotZone->RWprotection = (ST25DV_PROTECTION_CONF)((reg_value & ST25DV_RFA1SS_RWPROT_MASK) >> ST25DV_RFA1SS_RWPROT_SHIFT);
}
return status;
}
/**
* @brief Writes the RF Zone Security Status (defining the allowed RF accesses)
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param Zone ST25DV_PROTECTION_ZONE value corresponding to the area on which to set the RF protection.
* @param RfProtZone Pointer on a ST25DV_RF_PROT_ZONE value defininf the protection to be set on the area.
* @retval Component error status.
*/
int32_t ST25DV_WriteRFZxSS( ST25DV_Object_t* pObj, const ST25DV_PROTECTION_ZONE Zone, const ST25DV_RF_PROT_ZONE RfProtZone )
{
uint8_t reg_value;
int32_t status;
/* Update Sector Security Status */
reg_value = (RfProtZone.RWprotection << ST25DV_RFA1SS_RWPROT_SHIFT) & ST25DV_RFA1SS_RWPROT_MASK;
reg_value |= ((RfProtZone.PasswdCtrl << ST25DV_RFA1SS_PWDCTRL_SHIFT) & ST25DV_RFA1SS_PWDCTRL_MASK);
/* Write Sector Security register */
switch( Zone )
{
case ST25DV_PROT_ZONE1:
status = st25dv_set_rfa1ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE2:
status = st25dv_set_rfa2ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE3:
status = st25dv_set_rfa3ss_all(&(pObj->Ctx), &reg_value);
break;
case ST25DV_PROT_ZONE4:
status = st25dv_set_rfa4ss_all(&(pObj->Ctx), &reg_value);
break;
default:
status = ST25DV_ERROR;
}
return status;
}
/**
* @brief Reads the value of the an area end address.
* @param pObj the device pObj
* @param EndZone ST25DV_END_ZONE value corresponding to an area end address.
* @param pEndZ Pointer used to return the end address of the area.
* @retval Component error status.
*/
int32_t ST25DV_ReadEndZonex( ST25DV_Object_t* pObj, const ST25DV_END_ZONE EndZone, uint8_t * pEndZ )
{
int32_t status;
/* Read the corresponding End zone */
switch( EndZone )
{
case ST25DV_ZONE_END1:
status = st25dv_get_enda1(&(pObj->Ctx),pEndZ);
break;
case ST25DV_ZONE_END2:
status = st25dv_get_enda2(&(pObj->Ctx),pEndZ);
break;
case ST25DV_ZONE_END3:
status = st25dv_get_enda3(&(pObj->Ctx),pEndZ);
break;
default:
status = ST25DV_ERROR;
}
return status;
}
/**
* @brief Sets the end address of an area.
* @details Needs the I2C Password presentation to be effective.
* @note The ST25DV answers a NACK when setting the EndZone2 & EndZone3 to same value than repectively EndZone1 & EndZone2.\n
* These NACKs are ok.
* @param pObj the device pObj
* @param EndZone ST25DV_END_ZONE value corresponding to an area.
* @param EndZ End zone value to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteEndZonex( ST25DV_Object_t* pObj, const ST25DV_END_ZONE EndZone, const uint8_t EndZ )
{
int32_t status;
/* Write the corresponding End zone value in register */
switch( EndZone )
{
case ST25DV_ZONE_END1:
status = st25dv_set_enda1(&(pObj->Ctx),&EndZ);
break;
case ST25DV_ZONE_END2:
status = st25dv_set_enda2(&(pObj->Ctx),&EndZ);
break;
case ST25DV_ZONE_END3:
status = st25dv_set_enda3(&(pObj->Ctx),&EndZ);
break;
default:
status = ST25DV_ERROR;
}
return status;
}
/**
* @brief Initializes the end address of the ST25DV areas with their default values (end of memory).
* @details Needs the I2C Password presentation to be effective..
* The ST25DV answers a NACK when setting the EndZone2 & EndZone3 to same value than repectively EndZone1 & EndZone2.
* These NACKs are ok.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_InitEndZone( ST25DV_Object_t* pObj )
{
uint8_t endval = 0xFF;
uint32_t maxmemlength;
ST25DV_MEM_SIZE memsize;
int32_t ret;
memsize.Mem_Size = 0;
memsize.BlockSize = 0;
/* Get EEPROM mem size */
ST25DV_ReadMemSize(pObj, &memsize );
maxmemlength = (memsize.Mem_Size + 1) * (memsize.BlockSize + 1);
/* Compute Max value for endzone register */
endval = (maxmemlength / 32) - 1;
/* Write EndZone value to ST25DV registers */
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END3, endval );
if( (ret == ST25DV_OK) || (ret == ST25DV_NACK) )
{
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END2, endval );
if( (ret == ST25DV_OK) || (ret == ST25DV_NACK) )
{
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END1, endval );
}
}
return ret;
}
/**
* @brief Creates user areas with defined lengths.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param Zone1Length Length of area1 in bytes (32 to 8192, 0x20 to 0x2000)
* @param Zone2Length Length of area2 in bytes (0 to 8128, 0x00 to 0x1FC0)
* @param Zone3Length Length of area3 in bytes (0 to 8064, 0x00 to 0x1F80)
* @param Zone4Length Length of area4 in bytes (0 to 8000, 0x00 to 0x1F40)
* @retval Component error status.
*/
int32_t ST25DV_CreateUserZone( ST25DV_Object_t* pObj, uint16_t Zone1Length, uint16_t Zone2Length, uint16_t Zone3Length, uint16_t Zone4Length )
{
uint8_t EndVal;
ST25DV_MEM_SIZE memsize;
uint16_t maxmemlength = 0;
int32_t ret = ST25DV_OK;
memsize.Mem_Size = 0;
memsize.BlockSize = 0;
ST25DV_ReadMemSize(pObj, &memsize );
maxmemlength = (memsize.Mem_Size + 1) * (memsize.BlockSize + 1);
/* Checks that values of different zones are in bounds */
if( ( Zone1Length < 32 ) || ( Zone1Length > maxmemlength ) || ( Zone2Length > (maxmemlength - 32) )
|| ( Zone3Length > (maxmemlength - 64) ) || ( Zone4Length > (maxmemlength - 96) ) )
{
ret = ST25DV_ERROR;
}
/* Checks that the total is less than the authorised maximum */
if( ( Zone1Length + Zone2Length + Zone3Length + Zone4Length ) > maxmemlength )
{
ret = ST25DV_ERROR;
}
if ( ret == ST25DV_OK)
{
/* if The value for each Length is not a multiple of 64 correct it. */
if( (Zone1Length % 32) != 0 )
{
Zone1Length = Zone1Length - ( Zone1Length % 32 );
}
if( (Zone2Length % 32) != 0 )
{
Zone2Length = Zone2Length - ( Zone2Length % 32 );
}
if( (Zone3Length % 32) != 0 )
{
Zone3Length = Zone3Length - ( Zone3Length % 32 );
}
/* First right 0xFF in each Endx value */
ret = ST25DV_InitEndZone( pObj);
if( (ret == ST25DV_OK) || (ret == ST25DV_NACK) )
{
/* Then Write corresponding value for each zone */
EndVal = (uint8_t)( (Zone1Length / 32 ) - 1 );
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END1, EndVal );
if( (ret == ST25DV_OK) || (ret == ST25DV_NACK) )
{
EndVal = (uint8_t)( ((Zone1Length + Zone2Length) / 32 ) - 1 );
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END2, EndVal );
if( (ret == ST25DV_OK) || (ret == ST25DV_NACK) )
{
EndVal = (uint8_t)( ((Zone1Length + Zone2Length + Zone3Length) / 32 ) - 1 );
ret = ST25DV_WriteEndZonex(pObj, ST25DV_ZONE_END3, EndVal );
}
}
}
}
return ret;
}
/**
* @brief Reads the ST25DV Memory Size.
* @param pObj the device pObj
* @param pSizeInfo Pointer on a ST25DV_MEM_SIZE structure used to return the Memory size information.
* @retval Component error status.
*/
int32_t ST25DV_ReadMemSize( ST25DV_Object_t* pObj, ST25DV_MEM_SIZE * const pSizeInfo )
{
uint8_t memsize_msb;
uint8_t memsize_lsb;
int32_t status;
/* Read actual value of MEM_SIZE register */
status = st25dv_get_mem_size_lsb(&(pObj->Ctx), &memsize_lsb);
if( status == ST25DV_OK )
{
status = st25dv_get_mem_size_msb(&(pObj->Ctx), &memsize_msb);
if( status == ST25DV_OK )
{
status = st25dv_get_blk_size(&(pObj->Ctx), &(pSizeInfo->BlockSize));
if( status == ST25DV_OK )
{
/* Extract Memory information */
pSizeInfo->Mem_Size = memsize_msb;
pSizeInfo->Mem_Size = (pSizeInfo->Mem_Size << 8) |memsize_lsb;
}
}
}
return status;
}
/**
* @brief Reads the Energy harvesting mode.
* @param pObj the device pObj
* @param pEH_mode Pointer on a ST25DV_EH_MODE_STATUS value corresponding to the Energy Harvesting state.
* @retval Component error status.
*/
int32_t ST25DV_ReadEHMode( ST25DV_Object_t* pObj, ST25DV_EH_MODE_STATUS * const pEH_mode )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of EH_MODE register */
status = st25dv_get_eh_mode( &(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract EH_mode configuration */
if( reg_value )
{
*pEH_mode = ST25DV_EH_ON_DEMAND;
}
else
{
*pEH_mode = ST25DV_EH_ACTIVE_AFTER_BOOT;
}
}
return status;
}
/**
* @brief Sets the Energy harvesting mode.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param EH_mode ST25DV_EH_MODE_STATUS value for the Energy harvesting mode to be set.
* @retval Component error status.
*/
int32_t ST25DV_WriteEHMode( ST25DV_Object_t* pObj, const ST25DV_EH_MODE_STATUS EH_mode )
{
uint8_t reg_value;
/* Update EH_mode */
reg_value = (uint8_t)EH_mode;
/* Write EH_MODE register */
return st25dv_set_eh_mode(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the RF Management configuration.
* @param pObj the device pObj
* @param pRF_Mngt Pointer on a ST25DV_RF_MNGT structure used to return the RF Management configuration.
* @retval Component error status.
*/
int32_t ST25DV_ReadRFMngt( ST25DV_Object_t* pObj, ST25DV_RF_MNGT * const pRF_Mngt )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT register */
status = st25dv_get_rf_mngt_all(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract RF Disable information */
if( (reg_value & ST25DV_RF_MNGT_RFDIS_MASK) == ST25DV_RF_MNGT_RFDIS_MASK )
{
pRF_Mngt->RfDisable = ST25DV_ENABLE;
}
else
{
pRF_Mngt->RfDisable = ST25DV_DISABLE;
}
/* Extract RF Sleep information */
if( (reg_value & ST25DV_RF_MNGT_RFSLEEP_MASK) == ST25DV_RF_MNGT_RFSLEEP_MASK )
{
pRF_Mngt->RfSleep = ST25DV_ENABLE;
}
else
{
pRF_Mngt->RfSleep = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the RF Management configuration.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param Rfmngt Value of the RF Management configuration to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteRFMngt( ST25DV_Object_t* pObj, const uint8_t Rfmngt )
{
/* Write RF_MNGT register */
return st25dv_set_rf_mngt_all(&(pObj->Ctx), &Rfmngt);
}
/**
* @brief Reads the RFDisable register information.
* @param pRFDisable Pointer on a ST25DV_EN_STATUS value corresponding to the RF Disable status.
* @retval Component error status.
*/
int32_t ST25DV_GetRFDisable( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pRFDisable )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT register */
status = st25dv_get_rf_mngt_rfdis(&(pObj->Ctx), &reg_value);
/* Extract RFDisable information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pRFDisable = ST25DV_ENABLE;
}
else
{
*pRFDisable = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the RF Disable configuration.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetRFDisable( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
/* Write RF_MNGT register */
return st25dv_set_rf_mngt_rfdis(&(pObj->Ctx), &reg_value);
}
/**
* @brief Resets the RF Disable configuration
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetRFDisable( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
/* Write RF_MNGT register */
return st25dv_set_rf_mngt_rfdis(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the RFSleep register information.
* @param pObj the device pObj
* @param pRFSleep Pointer on a ST25DV_EN_STATUS value corresponding to the RF Sleep status.
* @retval Component error status.
*/
int32_t ST25DV_GetRFSleep( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pRFSleep )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT register */
status = st25dv_get_rf_mngt_rfsleep(&(pObj->Ctx), &reg_value);
/* Extract RFDisable information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pRFSleep = ST25DV_ENABLE;
}
else
{
*pRFSleep = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the RF Sleep configuration.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetRFSleep(ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
/* Write RF_MNGT register */
return st25dv_set_rf_mngt_rfsleep(&(pObj->Ctx), &reg_value);
}
/**
* @brief Resets the RF Sleep configuration.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetRFSleep( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
/* Write RF_MNGT register */
return st25dv_set_rf_mngt_rfsleep(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the Mailbox mode.
* @param pObj the device pObj
* @param pMB_mode Pointer on a ST25DV_EH_MODE_STATUS value used to return the Mailbox mode.
* @retval Component error status.
*/
int32_t ST25DV_ReadMBMode( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pMB_mode )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of MB_MODE register */
status = st25dv_get_mb_mode_rw(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract Mailbox mode status */
if( reg_value )
{
*pMB_mode = ST25DV_ENABLE;
}
else
{
*pMB_mode = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the Mailbox mode.
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param MB_mode ST25DV_EN_STATUS value corresponding to the Mailbox mode to be set.
* @retval Component error status.
*/
int32_t ST25DV_WriteMBMode( ST25DV_Object_t* pObj, const ST25DV_EN_STATUS MB_mode )
{
uint8_t reg_value;
int32_t status;
/* Update Mailbox mode status */
reg_value = (uint8_t)MB_mode;
/* Write MB_MODE register */
status = st25dv_set_mb_mode_rw(&(pObj->Ctx), &reg_value);
return status;
}
/**
* @brief Reads the Mailbox watchdog duration coefficient.
* @param pObj the device pObj
* @param pWdgDelay Pointer on a uint8_t used to return the watchdog duration coefficient.
* @retval Component error status.
*/
int32_t ST25DV_ReadMBWDG( ST25DV_Object_t* pObj, uint8_t * const pWdgDelay )
{
/* Read actual value of MB_WDG register */
return st25dv_get_mb_wdg_delay(&(pObj->Ctx), pWdgDelay);
}
/**
* @brief Writes the Mailbox watchdog coefficient delay
* @details Needs the I2C Password presentation to be effective.
* @param pObj the device pObj
* @param WdgDelay Watchdog duration coefficient to be written (Watch dog duration = MB_WDG*30 ms +/- 6%).
* @retval Component error status.
*/
int32_t ST25DV_WriteMBWDG( ST25DV_Object_t* pObj, const uint8_t WdgDelay )
{
/* Write MB_WDG register */
return st25dv_set_mb_wdg_delay(&(pObj->Ctx), &WdgDelay);
}
/**
* @brief Reads N bytes of data from the Mailbox, starting at the specified byte offset.
* @param pObj the device pObj
* @param pData Pointer on the buffer used to return the read data.
* @param Offset Offset in the Mailbox memory, byte number to start the read.
* @param NbByte Number of bytes to be read.
* @retval Component error status.
*/
int32_t ST25DV_ReadMailboxData( ST25DV_Object_t* pObj, uint8_t * const pData, const uint16_t Offset, const uint16_t NbByte )
{
int32_t status = ST25DV_ERROR;
if( Offset <= ST25DV_MAX_MAILBOX_LENGTH )
{
status = pObj->IO.Read( ST25DV_ADDR_DATA_I2C, ST25DV_MAILBOX_RAM_REG + Offset, pData, NbByte );
}
/* Read Data in user memory */
return status;
}
/**
* @brief Writes N bytes of data in the Mailbox, starting from first Mailbox Address.
* @param pObj the device pObj
* @param pData Pointer to the buffer containing the data to be written.
* @param NbByte Number of bytes to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteMailboxData( ST25DV_Object_t* pObj, const uint8_t * const pData, const uint16_t NbByte )
{
int32_t status = ST25DV_ERROR;
/* ST25DV can write a maximum of 256 bytes in Mailbox */
if( NbByte <= ST25DV_MAX_MAILBOX_LENGTH )
{
/* Write NbByte data in memory */
status = pObj->IO.Write( ST25DV_ADDR_DATA_I2C, ST25DV_MAILBOX_RAM_REG, pData, NbByte );
}
return status;
}
/**
* @brief Reads N bytes from the mailbox registers, starting at the specified I2C address.
* @param pObj the device pObj
* @param pData Pointer on the buffer used to return the data.
* @param TarAddr I2C memory address to be read.
* @param NbByte Number of bytes to be read.
* @retval Component error status.
*/
int32_t ST25DV_ReadMailboxRegister( ST25DV_Object_t* pObj, uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
int32_t status = ST25DV_ERROR;
if( (TarAddr >= ST25DV_GPO_DYN_REG) && (TarAddr <= ST25DV_MBLEN_DYN_REG) )
{
status = pObj->IO.Read( ST25DV_ADDR_DATA_I2C, TarAddr,pData, NbByte);
}
return status;
}
/**
* @brief Writes N bytes to the specified mailbox register.
* @param pObj the device pObj
* @param pData Pointer on the data to be written.
* @param TarAddr I2C register address to be written.
* @param NbByte Number of bytes to be written.
* @retval Component error status.
*/
int32_t ST25DV_WriteMailboxRegister( ST25DV_Object_t* pObj, const uint8_t * const pData, const uint16_t TarAddr, const uint16_t NbByte )
{
int32_t status = ST25DV_ERROR;
if( (TarAddr >= ST25DV_GPO_DYN_REG) && (TarAddr <= ST25DV_MBLEN_DYN_REG) )
{
status = pObj->IO.Write( ST25DV_ADDR_DATA_I2C, TarAddr,pData, NbByte);
}
/* Write NbByte data in memory */
return status;
}
/**
* @brief Reads the status of the security session open register.
* @param pObj the device pObj
* @param pSession Pointer on a ST25DV_I2CSSO_STATUS value used to return the session status.
* @retval Component error status.
*/
int32_t ST25DV_ReadI2CSecuritySession_Dyn( ST25DV_Object_t* pObj, ST25DV_I2CSSO_STATUS * const pSession )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of I2C_SSO_DYN register */
status = st25dv_get_i2c_sso_dyn_i2csso(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract Open session information */
if( reg_value )
{
*pSession = ST25DV_SESSION_OPEN;
}
else
{
*pSession = ST25DV_SESSION_CLOSED;
}
}
return status;
}
/**
* @brief Reads the IT status register from the ST25DV.
* @param pObj the device pObj
* @param pITStatus Pointer on uint8_t, used to return the IT status, such as:
* - RFUSERSTATE = 0x01
* - RFBUSY = 0x02
* - RFINTERRUPT = 0x04
* - FIELDFALLING = 0x08
* - FIELDRISING = 0x10
* - RFPUTMSG = 0x20
* - RFGETMSG = 0x40
* - RFWRITE = 0x80
*
* @retval Component error status.
*/
int32_t ST25DV_ReadITSTStatus_Dyn( ST25DV_Object_t* pObj, uint8_t * const pITStatus )
{
/* Read value of ITStatus register */
return st25dv_get_itsts_dyn_all(&(pObj->Ctx), pITStatus );
}
/**
* @brief Read value of dynamic GPO register configuration.
* @param pObj the device pObj
* @param pGPO ST25DV_GPO pointer of the dynamic GPO configuration to store.
* @retval Component error status.
*/
int32_t ST25DV_ReadGPO_Dyn( ST25DV_Object_t* pObj, uint8_t *GPOConfig )
{
/* Read actual value of ST25DV_GPO_DYN_REG register */
return st25dv_get_gpo_dyn_all(&(pObj->Ctx), GPOConfig);
}
/**
* @brief Get dynamique GPO enable status
* @param pObj the device pObj
* @param pGPO_en ST25DV_EN_STATUS pointer of the GPO enable status to store
* @retval Component error status.
*/
int32_t ST25DV_GetGPO_en_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pGPO_en )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of GPO_DYN register */
status = st25dv_get_gpo_dyn_enable(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract GPO enable status information */
if( reg_value )
{
*pGPO_en = ST25DV_ENABLE;
}
else
{
*pGPO_en = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Set dynamique GPO enable configuration.
* @param pObj the device pObj
* @param None No parameters.
* @retval Component error status.
*/
int32_t ST25DV_SetGPO_en_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
/* Write GPO_DYN Register */
return st25dv_set_gpo_dyn_enable(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reset dynamique GPO enable configuration.
* @param pObj the device pObj
* @param None No parameters.
* @retval Component error status.
*/
int32_t ST25DV_ResetGPO_en_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
/* Write GPO_DYN Register */
return st25dv_set_gpo_dyn_enable(&(pObj->Ctx), &reg_value);
}
/**
* @brief Read value of dynamic EH Ctrl register configuration
* @param pObj the device pObj
* @param pEH_CTRL : ST25DV_EH_CTRL pointer of the dynamic EH Ctrl configuration to store
* @retval Component error status.
*/
int32_t ST25DV_ReadEHCtrl_Dyn( ST25DV_Object_t* pObj, ST25DV_EH_CTRL * const pEH_CTRL )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of ST25DV_EH_CTRL_DYN_REG register */
status = st25dv_get_eh_ctrl_dyn_all(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract EH EN Mode configuration */
if( (reg_value & ST25DV_EH_CTRL_DYN_EH_EN_MASK) == ST25DV_EH_CTRL_DYN_EH_EN_MASK )
{
pEH_CTRL->EH_EN_Mode = ST25DV_ENABLE;
}
else
{
pEH_CTRL->EH_EN_Mode = ST25DV_DISABLE;
}
/* Extract EH_ON configuration */
if( (reg_value & ST25DV_EH_CTRL_DYN_EH_ON_MASK) == ST25DV_EH_CTRL_DYN_EH_ON_MASK )
{
pEH_CTRL->EH_on = ST25DV_ENABLE;
}
else
{
pEH_CTRL->EH_on = ST25DV_DISABLE;
}
/* Extract FIELD_ON configuration */
if( (reg_value & ST25DV_EH_CTRL_DYN_FIELD_ON_MASK) == ST25DV_EH_CTRL_DYN_FIELD_ON_MASK )
{
pEH_CTRL->Field_on = ST25DV_ENABLE;
}
else
{
pEH_CTRL->Field_on = ST25DV_DISABLE;
}
/* Extract VCC_ON configuration */
if( (reg_value & ST25DV_EH_CTRL_DYN_VCC_ON_MASK) == ST25DV_EH_CTRL_DYN_VCC_ON_MASK )
{
pEH_CTRL->VCC_on = ST25DV_ENABLE;
}
else
{
pEH_CTRL->VCC_on = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Reads the Energy Harvesting dynamic status.
* @param pObj the device pObj
* @param pEH_Val Pointer on a ST25DV_EN_STATUS value used to return the Energy Harvesting dynamic status.
* @retval Component error status.
*/
int32_t ST25DV_GetEHENMode_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pEH_Val )
{
uint8_t reg_value;
int32_t status;
/* Read actual value of EH_CTRL_DYN register */
status = st25dv_get_eh_ctrl_dyn_eh_en(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract Energy Harvesting status information */
if( reg_value )
{
*pEH_Val = ST25DV_ENABLE;
}
else
{
*pEH_Val = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Dynamically sets the Energy Harvesting mode.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetEHENMode_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
/* Write EH_CTRL_DYN Register */
return st25dv_set_eh_ctrl_dyn_eh_en(&(pObj->Ctx), &reg_value);
}
/**
* @brief Dynamically unsets the Energy Harvesting mode.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetEHENMode_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
/* Write EH_CTRL_DYN Register */
return st25dv_set_eh_ctrl_dyn_eh_en(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the EH_ON status from the EH_CTRL_DYN register.
* @param pObj the device pObj
* @param pEHON Pointer on a ST25DV_EN_STATUS value used to return the EHON status.
* @retval Component error status.
*/
int32_t ST25DV_GetEHON_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pEHON )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of EH_CTRL_DYN register */
status = st25dv_get_eh_ctrl_dyn_eh_on(&(pObj->Ctx), &reg_value);
/* Extract RF Field information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pEHON = ST25DV_ENABLE;
}
else
{
*pEHON = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Checks if RF Field is present in front of the ST25DV.
* @param pObj the device pObj
* @param pRF_Field Pointer on a ST25DV_FIELD_STATUS value used to return the field presence.
* @retval Component error status.
*/
int32_t ST25DV_GetRFField_Dyn( ST25DV_Object_t* pObj, ST25DV_FIELD_STATUS * const pRF_Field )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of EH_CTRL_DYN register */
status = st25dv_get_eh_ctrl_dyn_field_on(&(pObj->Ctx), &reg_value );
/* Extract RF Field information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pRF_Field = ST25DV_FIELD_ON;
}
else
{
*pRF_Field = ST25DV_FIELD_OFF;
}
}
return status;
}
/**
* @brief Check if VCC is supplying the ST25DV.
* @param pObj the device pObj
* @param pVCC ST25DV_VCC_STATUS pointer of the VCC status to store
* @retval Component error status.
*/
int32_t ST25DV_GetVCC_Dyn( ST25DV_Object_t* pObj, ST25DV_VCC_STATUS * const pVCC )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of EH_CTRL_DYN register */
status = st25dv_get_eh_ctrl_dyn_vcc_on(&(pObj->Ctx), &reg_value );
/* Extract VCC information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pVCC = ST25DV_VCC_ON;
}
else
{
*pVCC = ST25DV_VCC_OFF;
}
}
return status;
}
/**
* @brief Read value of dynamic RF Management configuration
* @param pObj the device pObj
* @param pRF_Mngt : ST25DV_RF_MNGT pointer of the dynamic RF Management configuration to store
* @retval Component error status.
*/
int32_t ST25DV_ReadRFMngt_Dyn( ST25DV_Object_t* pObj, ST25DV_RF_MNGT * const pRF_Mngt )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT_DYN register */
status = st25dv_get_rf_mngt_dyn_all(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract RF Disable configuration */
if( (reg_value & ST25DV_RF_MNGT_DYN_RFDIS_MASK) == ST25DV_RF_MNGT_DYN_RFDIS_MASK )
{
pRF_Mngt->RfDisable = ST25DV_ENABLE;
}
else
{
pRF_Mngt->RfDisable = ST25DV_DISABLE;
}
/* Extract RF Sleep configuration */
if( (reg_value & ST25DV_RF_MNGT_DYN_RFSLEEP_MASK) == ST25DV_RF_MNGT_DYN_RFSLEEP_MASK )
{
pRF_Mngt->RfSleep = ST25DV_ENABLE;
}
else
{
pRF_Mngt->RfSleep = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Writes a value to the RF Management dynamic register.
* @param pObj the device pObj
* @param RF_Mngt Value to be written to the RF Management dynamic register.
* @retval Component error status.
*/
int32_t ST25DV_WriteRFMngt_Dyn( ST25DV_Object_t* pObj, const uint8_t RF_Mngt )
{
/* Write value to RF_MNGT_DYN register */
return st25dv_set_rf_mngt_dyn_all(&(pObj->Ctx), &RF_Mngt);
}
/**
* @brief Reads the RFDisable dynamic register information.
* @param pObj the device pObj
* @param pRFDisable Pointer on a ST25DV_EN_STATUS value used to return the RF Disable state.
* @retval Component error status.
*/
int32_t ST25DV_GetRFDisable_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pRFDisable )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT_DYN register */
status = st25dv_get_rf_mngt_dyn_rfdis(&(pObj->Ctx), &reg_value);
/* Extract RFDisable information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pRFDisable = ST25DV_ENABLE;
}
else
{
*pRFDisable = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the RF Disable dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetRFDisable_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
return st25dv_set_rf_mngt_dyn_rfdis(&(pObj->Ctx), &reg_value);
}
/**
* @brief Unsets the RF Disable dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetRFDisable_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
return st25dv_set_rf_mngt_dyn_rfdis(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the RFSleep dynamic register information.
* @param pObj the device pObj
* @param pRFSleep Pointer on a ST25DV_EN_STATUS values used to return the RF Sleep state.
* @retval Component error status.
*/
int32_t ST25DV_GetRFSleep_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pRFSleep )
{
int32_t status;
uint8_t reg_value = 0;
/* Read actual value of RF_MNGT_DYN register */
status = st25dv_get_rf_mngt_dyn_rfsleep(&(pObj->Ctx), &reg_value);
/* Extract RFSleep information */
if( status == ST25DV_OK )
{
if( reg_value )
{
*pRFSleep = ST25DV_ENABLE;
}
else
{
*pRFSleep = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the RF Sleep dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetRFSleep_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
return st25dv_set_rf_mngt_dyn_rfsleep(&(pObj->Ctx), &reg_value);
}
/**
* @brief Unsets the RF Sleep dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetRFSleep_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
return st25dv_set_rf_mngt_dyn_rfsleep(&(pObj->Ctx), &reg_value);
}
/**
* @brief Reads the Mailbox ctrl dynamic register.
* @param pObj the device pObj
* @param pCtrlStatus Pointer on a ST25DV_MB_CTRL_DYN_STATUS structure used to return the dynamic Mailbox ctrl information.
* @retval Component error status.
*/
int32_t ST25DV_ReadMBCtrl_Dyn( ST25DV_Object_t* pObj, ST25DV_MB_CTRL_DYN_STATUS * const pCtrlStatus )
{
uint8_t reg_value;
int32_t status;
/* Read MB_CTRL_DYN register */
status = st25dv_get_mb_ctrl_dyn_all(&(pObj->Ctx), &reg_value);
if( status == ST25DV_OK )
{
/* Extract Mailbox ctrl information */
pCtrlStatus->MbEnable = (reg_value & ST25DV_MB_CTRL_DYN_MBEN_MASK) >> ST25DV_MB_CTRL_DYN_MBEN_SHIFT;
pCtrlStatus->HostPutMsg = (reg_value & ST25DV_MB_CTRL_DYN_HOSTPUTMSG_MASK) >> ST25DV_MB_CTRL_DYN_HOSTPUTMSG_SHIFT;
pCtrlStatus->RfPutMsg = (reg_value & ST25DV_MB_CTRL_DYN_RFPUTMSG_MASK) >> ST25DV_MB_CTRL_DYN_RFPUTMSG_SHIFT;
pCtrlStatus->HostMissMsg = (reg_value & ST25DV_MB_CTRL_DYN_HOSTMISSMSG_MASK) >> ST25DV_MB_CTRL_DYN_HOSTMISSMSG_SHIFT;
pCtrlStatus->RFMissMsg = (reg_value & ST25DV_MB_CTRL_DYN_RFMISSMSG_MASK) >> ST25DV_MB_CTRL_DYN_RFMISSMSG_SHIFT;
pCtrlStatus->CurrentMsg = (ST25DV_CURRENT_MSG)((reg_value & ST25DV_MB_CTRL_DYN_CURRENTMSG_MASK) >> ST25DV_MB_CTRL_DYN_CURRENTMSG_SHIFT);
}
return status;
}
/**
* @brief Reads the Mailbox Enable dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_GetMBEN_Dyn( ST25DV_Object_t* pObj, ST25DV_EN_STATUS * const pMBEN )
{
uint8_t reg_value;
int32_t status;
/* Read MB_CTRL_DYN register */
status = st25dv_get_mb_ctrl_dyn_mben( &(pObj->Ctx),&reg_value );
if( status == ST25DV_OK )
{
if( reg_value )
{
*pMBEN = ST25DV_ENABLE;
}
else
{
*pMBEN = ST25DV_DISABLE;
}
}
return status;
}
/**
* @brief Sets the Mailbox Enable dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_SetMBEN_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 1;
/* Write MB_CTRL_DYN register */
return st25dv_set_mb_ctrl_dyn_mben( &(pObj->Ctx),&reg_value );
}
/**
* @brief Unsets the Mailbox Enable dynamic configuration.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ResetMBEN_Dyn( ST25DV_Object_t* pObj )
{
uint8_t reg_value = 0;
/* Write MB_CTRL_DYN register */
return st25dv_set_mb_ctrl_dyn_mben( &(pObj->Ctx),&reg_value );
}
/**
* @brief Reads the Mailbox message length dynamic register.
* @param pMBLength Pointer on a uint8_t used to return the Mailbox message length.
* @param pObj the device pObj
* @retval Component error status.
*/
int32_t ST25DV_ReadMBLength_Dyn( ST25DV_Object_t* pObj, uint8_t * const pMBLength )
{
/* Read actual value of MBLEN_DYN register */
return st25dv_get_mblen_dyn_mblen( &(pObj->Ctx),pMBLength );
}
static int32_t ReadRegWrap(void *handle, uint16_t Reg, uint8_t* pData, uint16_t len)
{
int32_t status;
ST25DV_Object_t *pObj = (ST25DV_Object_t *)handle;
if(Reg & (ST25DV_IS_DYNAMIC_REGISTER))
{
status = pObj->IO.Read(ST25DV_ADDR_DATA_I2C, Reg, pData, len);
} else {
status = pObj->IO.Read(ST25DV_ADDR_SYST_I2C, Reg, pData, len);
}
return status;
}
static int32_t WriteRegWrap(void *handle, uint16_t Reg, const uint8_t* pData, uint16_t len)
{
int32_t ret;
ST25DV_Object_t *pObj = (ST25DV_Object_t *)handle;
if(Reg & (ST25DV_IS_DYNAMIC_REGISTER))
{
ret = pObj->IO.Write(ST25DV_ADDR_DATA_I2C, Reg, pData, len);
} else {
ret = pObj->IO.Write(ST25DV_ADDR_SYST_I2C, Reg, pData, len);
if( ret == ST25DV_OK )
{
int32_t pollstatus;
/* Poll until EEPROM is available */
uint32_t tickstart = pObj->IO.GetTick();
/* Wait until ST25DV is ready or timeout occurs */
do
{
pollstatus = pObj->IO.IsReady( ST25DV_ADDR_SYST_I2C, 1 );
} while( ( (uint32_t)((int32_t)pObj->IO.GetTick() - (int32_t)tickstart) < ST25DV_WRITE_TIMEOUT) && (pollstatus != ST25DV_OK) );
if( pollstatus != ST25DV_OK )
{
ret = ST25DV_TIMEOUT;
}
}
}
return ret;
}
/**
* @}
*/
/**
* @}
*/
/******************* (C) COPYRIGHT 2016 STMicroelectronics *****END OF FILE****/
View Git Blame Copy Permalink