Replace BMP280 with BME280: remove BMP280 files and implement BME280 initialization and reading functions

hardware/include/BME280.hpp

@@ -0,0 +1,7 @@
+#include <Wire.h>
+#include <BME280I2C.h>
+
+#define I2C_BMP280_ADDRESS 0x76
+
+void BME280_Init();
+bool BME280_Read(float &pressure, float &temperature, float &humidity);

hardware/include/BMP280.hpp

@@ -1,7 +0,0 @@
-#include <Wire.h>
-#include <BMP280_DEV.h>
-
-#define I2C_BMP280_ADDRESS 0x76
-
-void BMP280_Init();
-bool BMP280_Read(float &temperature, float &pressure, float &altitude);

hardware/include/main.hpp

@@ -9,6 +9,6 @@
 #include "RestClient.hpp"
 #include "WifiConnection.hpp"
 #include "MqttClient.hpp"
-#include "BMP280.hpp"
+#include "BME280.hpp"
 
 uint32_t getChipID();

hardware/platformio.ini

@@ -16,4 +16,4 @@ lib_deps =
 	knolleary/PubSubClient@^2.8
 	mikalhart/TinyGPSPlus@^1.0.2
 	bblanchon/ArduinoJson@^6.17.3
-	martinl1/BMP280_DEV@^1.0.21
+	finitespace/BME280@^3.0.0

hardware/src/BME280.cpp

@@ -0,0 +1,24 @@
+#include "BME280.hpp"
+
+BME280I2C bme;
+
+void BME280_Init()
+{
+    Wire.setPins(21, 22);
+    Wire.begin();
+    while(!bme.begin())
+    {
+        Serial.println("Could not find BME280 sensor!");
+        delay(1000);
+    }
+}
+
+bool BME280_Read(float &pressure, float &temperature, float &humidity)
+{
+    BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
+    BME280::PresUnit presUnit(BME280::PresUnit_Pa);
+    bme.read(pressure, temperature, humidity, tempUnit, presUnit);
+
+    return (temperature != 0.0f && pressure != 0.0f);
+}
+

hardware/src/BMP280.cpp

@@ -1,25 +0,0 @@
-#include "BMP280.hpp"
-
-BMP280_DEV bme;
-
-void BMP280_Init()
-{
-    Wire.setPins(21, 22);
-    if (!bme.begin(NORMAL_MODE, I2C_BMP280_ADDRESS))
-    {
-        Serial.println("BMP280 no detectado o error en la inicialización");
-    }
-    else
-    {
-        Serial.println("BMP280 inicializado correctamente");
-    }
-    bme.setTimeStandby(TIME_STANDBY_2000MS);
-    bme.startNormalConversion();
-}
-
-bool BMP280_Read(float &temperature, float &pressure, float &altitude)
-{
-    bme.getCurrentMeasurements(temperature, pressure, altitude);
-    return (temperature != 0.0f && pressure != 0.0f);
-}
-

hardware/src/main.cpp

@@ -38,24 +38,12 @@ void setup()
     getRequest(httpClient, "http://172.20.10.7:8082/api/v1/sensors/1/values", response);
     deserializeSensorValue(httpClient, httpClient.GET()); */
 
-    BMP280_Init();
+    BME280_Init();
+
 }
 
 void loop()
 {
-    if (BMP280_Read(temperature, pressure, altitude))
-    {
-        Serial.print("Temperature: ");
     Serial.println(temperature);
-        Serial.print("Pressure: ");
     Serial.println(pressure);
-        Serial.print("Altitude: ");
-        Serial.println(altitude);
-    }
-    else
-    {
-        Serial.println("❌ Lectura fallida del BMP280");
-    }
-
-    delay(2000);
 }